Cisco Configuration Professional

Q. How do I use Cisco Configuration Professional with an integrated services router that does not have a factory default configuration?

A. Steps to run Cisco Configuration Professional on a Cisco router with a non-factory default configuration follow:

Step 1. Connect to your router using Telnet or SSH or through the console.

Enter the global configuration mode using the command:

Router(config)#enable

Step 2. Enable the router HTTP or HTTPS server using the following Cisco IOS Software commands.

If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this step and simply use the port number already configured.

Router(config)# ip http server

Router(config)# ip http secure-server

Router(config)# ip http authentication local

Note: HTTPS is enabled only for cryptography-enabled Cisco IOS Software images.

Step 3. Create a user with privilege level 15.

Router(config)# username privilege 15 password 0

Note: Replace and with the username and password that you want to configure.

Step 4. Configure SSH and Telnet for local login and privilege level 15:

Router(config)# line vty 0 4

Router(config-line)# privilege level 15

Router(config-line)# login local

Router(config-line)# transport input telnet

Router(config-line)# transport input telnet ssh

Router(config-line)# exit

Step 5. (Optional) Enable local logging to support the log monitoring function:

Router(config)# logging buffered 51200 warning

http://www.static-cisco.com/assets/cdc_content_elements/embedded-video/video-data-sheets/ccp-overview.swf