Antenna Mobil 2 MTR >> HF

ANTENA MOBIL 2 MTR 

CONVERT  KE HF

• Siapkan Antenna VHF 2 mtr. (5/8 lamda), yang sudah di seting di Frek kerja 2 Meter.
• Siapkan PVC 1" 11cm. + 2 dop 1".
• Kawat email 1,5mm .
• Pasang 2 Konektor pada dop PVC, atas untuk Female, bawah tuk Male.
• Lilit Kawat email Untuk : 

- 27Mhz. 9 Lilit. spasi 0,5cm.

- 11 Mhz 28 Lilit. ( rapat ).

- 7 mhz 58 Lilit. ( Rapat ).

• Biarkan untuk Output ( Female) hanya terpasang Iner nya saja. (+). untuk tersambung ke antena Larsen 2 meter.
•  Siapkan Konektor SMA Jack Male & Female.
  
  Gambar :
  

Panjang Kabel Penyalur ( Coex ) 420cm + Braket ( Mount ), for HF ( standar ), Coil atau lilitan dalam keadaan terbuka dan tertutup ada perubahan.

Shortwave Antennas for 40m and 80m

Trying to use the shortwave bands for ham radio usually end up in the need of space for large antennas. Of course, the antenna should be "the larger the better" for these bands but sometimes there is no space available. I have also this problem as I only have a small balcony so I decided in trying to build extremely shortened antennas as this is common for mobile antennas. Here is a sketch of the layout:

I built two antennas, one for 40m and one for 80m and I had access to a professional vector network analyzer. The length of the radiator was choosen arbitraryly, then the parameter N₁ was varied to find the right resonant frequency. After thatm the parameter N₂ was varied to get 50 Ohm. The resonant frequency is independend of the parameter.

Here the results for the antenna for 40 m:
l=854mm
N₁=59
N₂=16
total length: 1.15m

And here the results for the 80 m antenna:
l=1500mm
N₁=98
N₂=18
total length: 2m

I used a PVC wastewater pipe with a diameter of 40mm. The radiator can be either fixed on that pipe too, or it can be installed in a separate pipe (one for electric installations in my case).